VoltsAndBoltsOnline
DT-750 info - Printable Version

+- VoltsAndBoltsOnline (http://voltsandboltsonline.com)
+-- Forum: Development Zone (http://voltsandboltsonline.com/forumdisplay.php?fid=14)
+--- Forum: Hardware (http://voltsandboltsonline.com/forumdisplay.php?fid=16)
+--- Thread: DT-750 info (/showthread.php?tid=12)



DT-750 info - VoltsAndBolts - 08-06-2015

I plan to ues the DT-750 kv motor on my Tri project. Though I would post a little info on it. It has a short bell and a relatively large diameter that contains 14 magnets, the stator has 12 windings. Bearings are 4x8x3mm I hear older units from around 2011 used a 4x7x2.5mm. I may take one apart measure it up and model it on CAD.